Vol. 4 No. 1 (2026): Volume 4 Issue 1, June 2026

Articles

• 

  Structural Performance Analysis of HDPE and ABS Formwork Designs Using Finite Element Analysis

  zulkarnaen zulkarnaen⁽¹⁾, Department of Mechanical Engineering, Institut Teknologi Sepuluh Nopember, ID;
  Harus Laksana Guntur⁽²⁾, Department of Mechanical Engineering, Institut Teknologi Sepuluh Nopember, ID;
  Riyki Apriandi⁽³⁾, Departement of Manufacturing Engineering, Politeknik Batulicin, ID;
  

  • pp.1-13
• 

  Assessment of Wave Characteristics in National Water Borders for Tactical Vessel Analysis and Maritime Security

  Muhammad Farhan Rahmat⁽¹⁾, Departement of Ocean Engineering, Institut Teknologi Sepuluh Nopember, 60111 Surabaya, Indonesia, ID;
  Husein Syahab⁽²⁾, Departement of Naval Architecture, Institut Teknologi Kalimantan, 76127 Balikpapan, Indonesia, ID;
  Amalia Ika Wulandari⁽³⁾, Departement of Naval Architecture, Institut Teknologi Kalimantan, 76127 Balikpapan, Indonesia, ID;
  Cahya Kusuma⁽⁴⁾, Operations Research and Systems Analysis, Akademi Angkatan Laut, 60178 Surabaya, Indonesia, ID;
  Mahendra Indiaryanto⁽⁵⁾, Research Center for Hydrodynamics Technology, National Research and Innovation Agency (BRIN), 60117 Surabaya, Indonesia, ID;
  Muhammad Anjas Syam⁽⁶⁾, Departement of Marine Engineering, Institut Teknologi Kalimantan, 76127 Balikpapan, Indonesia, ID;
  Fernanda Wahyu Pratama⁽⁷⁾, Departement of Marine Engineering, Institut Teknologi Kalimantan, 76127 Balikpapan, Indonesia, ID;
  Firman Noor⁽⁸⁾, Departement of Naval Architecture, Institut Teknologi Kalimantan, 76127 Balikpapan, Indonesia, ID;
  

  • pp.14-27
• 

  Conceptual and Preliminary Design Innovation of a Multipurpose Palm Fruit Vessel for Inland Plantation Waterways in Muara Kaman

  Suardi Suardi⁽¹⁾, Kalimantan Institute of Technology, ID;
  Jamal Jamal⁽²⁾, Department of Naval Architecture, Politeknik Negeri Bengkalis, ID;
  Arwis Irmandana⁽³⁾, Institut Teknologi Kalimantan, ID;
  Alamsyah Alamsyah⁽⁴⁾, Institut Teknologi Kalimantan, ID;
  Wira Setiawan⁽⁵⁾, Institut Teknologi Kalimantan, ID;
  Chris Jeremy Verian Sitorus⁽⁶⁾, Institut Teknologi Kalimantan, ID;
  Jusma Wahidah⁽⁷⁾, Institut Teknologi Kalimantan, ID;
  Cindy Lionita Agusty⁽⁸⁾, Institut Teknologi Kalimantan, ID;
  Faisal Mahmuddin⁽⁹⁾, Marine Engineering Department, Hasanuddin University, ID;
  

  • pp.28-36
• 

  Polbeng Research Vessel Comfort Study in the Malacca Strait

  jamal jamal⁽¹⁾, Politeknik Negeri Bengkalis, ID;
  Muhammad Alimul Hafiz⁽²⁾, Politeknik Negeri Bengkalis, ID;
  Budhi Santoso⁽³⁾, Politeknik Negeri Bengkalis, ID;
  Berlian Arswendo Adietya⁽⁴⁾, Diponegoro University, ID;
  Suardi⁽⁵⁾, Intitut Teknologi Kalimantan, ID;
  Juanda⁽⁶⁾, CV. Fatih Bahari Engineering, ID;
  

  • pp.37-47
• 

  Evaluation of Longitudinal Strength of a Cargo Barge Based on Shear Force and Still Water Bending Moment under Various Loading Conditions Evaluation of Longitudinal Strength of a Cargo Barge Based on Shear Force and Still Water Bending Moment under Various Loading Conditions

  Budhi Santoso⁽¹⁾, Department of Naval Architecture, Polytechnic of Bengkalis, ID;
  Romadhoni⁽²⁾, Department of Naval Architecture, Polytechnic of Bengkalis, ID;
  Jamal⁽³⁾, Department of Naval Architecture, Polytechnic of Bengkalis, ID;
  Deny Nusyirwan⁽⁴⁾, MarineEngineering Study Program, Faculty of Maritime Engineering and Technology, Raja Ali Haji Maritime University, ID;
  Naufal Abdurrahman⁽⁵⁾, Marine Engineering Technology Study Program, Batam State Polytechnic, ID;
  Zulfaidah Ariyany⁽⁶⁾, Department of Industrial Technology, Vocational College, Universitas Diponegoro, ID;
  

  • pp.48-59
• 

  Development of Practical Wind-Assisted Ship Propulsion (WASP) Calculation for Fuel Consumption and Emission Reduction

  Isna Aulia Marifa⁽¹⁾, Universitas Pembangunan Nasional Veteran Jakarta, ID;
  Dian Purnama Sari⁽²⁾, Research Center for Hydrodynamic Technology, National Research and Innovation Agency, Jl. Hidro Dinamika, Keputih, Kec. Sukolilo, Surabaya, Jawa Timur, Indonesia 60117|National Research and Innovation Agency., ID;
  Wiwin Sulistyawati⁽³⁾, Department of Naval Engineering, Universitas Pembangunan Nasional Veteran Jakarta, Jl. R.S Fatmawati No. 1, Cilandak, Jakarta Selatan 12450|Universitas Pembangunan Nasional Veteran Jakarta., ID;
  

  • pp.60-74
• 

  Energy Efficiency Analysis of Main Cooling Pump System on Bulk Carrier Using VSD

  Fajri Ashfi Rayhan⁽¹⁾, Department of Naval Architecture, Universitas Pembangunan Nasional Veteran Jakartandak, Jakarta Selatan 12450, ID;
  Rashieka Alma⁽²⁾, Department of Naval Architecture, Universitas Pembangunan Nasional Veteran Jakartandak, Jakarta Selatan 12450, ID;
  

  • pp.75-88
• 

  Energy Efficiency and Battery Load Sharing Analysis of 26-m Electric Supply Boat Using MATLAB

  Atikah Rafiah⁽¹⁾, Marine Engineering Department, Hasanuddin University, ID;
  Surya Hariyanto⁽²⁾, Marine Engineering Department, Hasanuddin University, ID;
  

  • pp.89-102
• 

  Influence of Conductor Pipe Diameter on the Global Structural Performance of a Fixed Offshore Wellhead Platform

  Afriza Akbar Ardiansyah⁽¹⁾, Department of Ocean Engineering, Institut Teknologi Kalimantan, Balikpapan, 76127, Indonesia, ID;
  Luh Putri Adnyani⁽²⁾, Department of Ocean Engineering, Institut Teknologi Kalimantan, Balikpapan, 76127, Indonesia, ID;
  Jumat Amin⁽³⁾, PT Depriwangga Engineering, Balikpapan, Indonesia, ID;
  Rahmawati⁽⁴⁾, Clough Australian Headquarters, Level 5 and 6, 250 St Georges Terrace, Perth, WA 6000, Australia., AU;
  

  • pp.103-110
• 

  Effect of Bow and Stern Line Angle Variations on the Resistance of a 35,000 DWT Bulk Carrier Using CFD

  HerawatyMagdalena Sihombing⁽¹⁾, Department of Ship Manufacturing Engineering, Politeknik Negeri Banyuwangi, Indonesia, ID;
  Anggra Fiveriati⁽²⁾, Ship Manufacturing Engineering Study Program, Department of Mechanical Engineering, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia, ID;
  IGNA Satria Prasetya⁽³⁾, Automotive Engineering Technology Study Program, Department of Mechanical Engineering, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia, ID;
  Abdul Rohman⁽⁴⁾, Ship Manufacturing Engineering Study Program, Department of Mechanical Engineering, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia, ID;
  

  • pp.111-125
• 

  Structural Response and Optimization of a Tugboat Midship Section Under Varied Transverse Frame Spacing Using Finite Element Analysis

  Amalia Ika Wulandari⁽¹⁾, Institut Teknologi Kalimantan, ID;
  Alamsyah Alamsyah⁽²⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, Balikpapan, ID;
  Hariyono⁽³⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, Balikpapan, ID;
  Ryan Raruk⁽⁴⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, Balikpapan, ID;
  Husein Syahab⁽⁵⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, Balikpapan, ID;
  Muhammad Anjas Syam⁽⁶⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, Balikpapan, ID;
  Suardi Suardi⁽⁷⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, Balikpapan, ID;
  Dimas Fajar Prasetyo⁽⁸⁾, School of Earth and Oceans, The University of Western Australia, Australia, AU;
  

  • pp.126-136
• 

  Resistance Analysis for the Application of Flowbow on DTMB 5415 Ship

  Arga Setya Andreardani⁽¹⁾, Department of Naval Architecture, Sepuluh Nopember Institute of Technology (ITS) , Surabaya, 60117, Indonesia, ID;
  I Ketut Suastika⁽²⁾, Department of Naval Architecture, Sepuluh Nopember Institute of Technology (ITS) , Surabaya, 60117, Indonesia, ID;
  Baharuddin Ali⁽³⁾, Research Center for Hydrodynamics Technology, BRIN, Surabaya, 60117, Indonesia , ID;
  Taufiq Arif Setyanto⁽⁴⁾, Research Center for Hydrodynamics Technology, BRIN, Surabaya, 60117, Indonesia, ID;
  Mahendra Indiaryanto⁽⁵⁾, Research Center for Hydrodynamics Technology, BRIN, Surabaya, 60117, Indonesia, ID;
  Amalia Ika Wulandari⁽⁶⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, 76127, Balikpapan, Indonesia, ID;
  Anson Novendra Pradana⁽⁷⁾, West Japan Fluid Engineering Laboratory CO., LTD. Japan, JP;
  

  • pp.137-147
• 

  Comparative Analysis of Turbulence Models for Gawn Series Propeller using CFD Method

  Adhyve Priambodo Bhaskara⁽¹⁾, Department of Naval Architecture, Sepuluh Nopember Institute of Technology, Surabaya, 60111, Indonesia, ID;
  I Ketut Suastika⁽²⁾, Department of Naval Architecture, Sepuluh Nopember Institute of Technology, Surabaya, 60111, Indonesia, ID;
  Mahendra Indiaryanto⁽³⁾, Research Center of Hydrodynamics Technology, National Research and Innovation Agency, Surabaya, 60117, Indonesia, ID;
  Taufiq Arif Setyanto⁽⁴⁾, Research Center of Hydrodynamics Technology, National Research and Innovation Agency, Surabaya, 60117, Indonesia, ID;
  Amalia Ika Wulandari⁽⁵⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, 76127, Balikpapan, Indonesia, ID;
  Dimas Fajar Prasetyo⁽⁶⁾, School of Earth and Oceans, The University of Western Australia, Perth, 6009, Australia, AU;
  

  • pp.148-162
• 

  Technical Analysis of the Solar-Assisted Fish Cooling System for Fishing Boat

  Risal Amin⁽¹⁾, Department of Naval Architecture, Institut Teknologi Kalimantan, Balikpapan, 76127, Indonesia, ID;
  Gad Gunawan⁽²⁾, Department of Mechanical Engineering, Institut Teknologi Kalimantan, Balikpapan, 76127, Indonesia, ID;
  Kharis Sugiarto⁽³⁾, Department of Electrical Engineering, Institut Teknologi Kalimantan, Balikpapan, 76127, Indonesia, ID;
  Happy Aprilia⁽⁴⁾, Department of Electrical Engineering, Institut Teknologi Kalimantan, Balikpapan, 76127, Indonesia, ID;
  Samsu Dlukha Nurcholik⁽⁵⁾, Naval Architecture, Institut Teknologi Kalimantan, ID;
  Devy Setiorini Sa’adiyah⁽⁶⁾, Department of Mechanical Engineering, Institut Teknologi Kalimantan, Balikpapan, 76127, Indonesia, ID;
  

  • pp.163-170
• 

  Computational Fluid Dynamics Analysis of Breakwater Configurations for Enhanced Coastal Resilience in North Java

  Alif Nur Rochmad⁽¹⁾, Department of Shipbuilding Engineering, Shipbuilding Institute of Polytechnic Surabaya, ID;
  Muhamad Rakif panguale⁽²⁾, Department of Shipbuilding Engineering, Shipbuilding Institute of Polytechnic Surabaya, ID;
  Muhamad Saiful Rahman Hamka⁽³⁾, Department of Shipbuilding Engineering, Shipbuilding Institute of Polytechnic Surabaya, ID;
  Septaviola Dini Utami⁽⁴⁾, Department of Shipbuilding Engineering, Shipbuilding Institute of Polytechnic Surabaya, ID;
  

  • pp.171-181
• 

  Development of River Port (Kelotok) In Penajam Paser Utara and Balikpapan by using BOR, LF, AHP and Triangulation Analysis

  Arief Hidayat⁽¹⁾, Department of Urban and Regional Planning, Kalimantan Institute of Technology, Balikpapan, 76127, Indonesia, ID;
  Johannes Diva Mahendra⁽²⁾, Department of Urban and Regional Planning, Kalimantan Institute of Technology, Balikpapan, 76127, Indonesia, ID;
  Shintaro Terabe⁽³⁾, Department of Civil Engineering, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba 278-8510, Japan, JP;
  

  • pp.182-193
• 

  Utilization of Egg Shell Powder as a Filler in Asphalt AC-WC (Asphalt Concrete-Wearing Course) Mixture on Air Flow and Absorption Characteristics

  Hijriah Hijriah⁽¹⁾, Department of Civil Engineering, Kalimantan Institute of Technology, ID;
  Syifa Fauziah⁽²⁾, Department of Civil Engineering, Kalimantan Institute of Technology, ID;
  Priyo Wibisono⁽³⁾, Department of Marine Transportation Engineering Kalimantan Institut of Technology, ID;
  Ardiansyah Fauzi⁽⁴⁾, Mathematics of Complex and Nonlinear Phenomena (MCNP), School of Engineering, Physics and Mathematics, Northumbria University, United Kingdom, GB;
  

  • pp.194-202