Vol. 2 No. 2 (2024): Volume 2 Issue 2, December 2024

Articles

• The Influence of Fiberglass Fiber Arrangement Variations on the Tensile and Bending Strength of Ships

  Restu Muharom⁽¹⁾, Department of Naval Architecture, Kalimantan Institute of Technology, Balikpapan, Indonesia, ID;
  Alamsyah⁽²⁾, Department of Naval Architecture, Kalimantan Institute of Technology, Balikpapan, Indonesia, ID;
  Taufik Hidayat⁽³⁾, Department of Naval Architecture, Kalimantan Institute of Technology, Balikpapan, Indonesia, ID;
  Husein Syahab ⁽⁴⁾, Department of Naval Architecture, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia, ID;
  

  • pp. 57-67

• CFD-Preliminary Design and Stability Analysis of a High-Speed Firefighting Boat for Remote Island Waterways

  Moh.Winki Wirawan⁽¹⁾, Department of Ship Manufacturing Engineering, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia, ID;
  Achdri Fauzi Nugraha Oloan⁽²⁾, Department of Ship Manufacturing Engineering, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia, ID;
  Albert Gabriel Subakti⁽³⁾, Department of Ship Manufacturing Engineering, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia, ID;
  Joan Rike Batosai⁽⁴⁾, Department of Naval Architecture, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia, ID;
  

  • pp. 68-81

• The Analysis of Work Accident Risk in Welding Process for Pipe Repair on Utility Boat PT LSM

  Andi Rachmianty⁽¹⁾, Marine Transportation, Politeknik Maritim AMI Makassar, ID;
  Ni Gusti Ayu Putu Dewi Armay Pragawati⁽²⁾, Marine Transportation, Politeknik Maritim AMI Makassar, ID;
  Andi Ningrat⁽³⁾, Marine Transportation, Politeknik Maritim AMI Makassar, ID;
  Arif Fudddin Usman⁽⁴⁾, Marine Transportation, Politeknik Maritim AMI Makassar, ID;
  Rusnaedi⁽⁵⁾, Marine Transportation, Politeknik Maritim AMI Makassar, ID;
  Muhammad Azhar Shauqy⁽⁶⁾, Marine Transportation, Politeknik Maritim AMI Makassar, ID;
  

  • pp. 82-91

• Rubber Tyred Gantry (RTG) Failure Analysis Using FMEA Method at PT. Kaltim Kariangau Terminal Balikpapan

  Rifkah Fitriah⁽¹⁾, Polytechnic of Maritime AMI Makassar, ID;
  Andi Ningrat⁽²⁾, Polytechnic of Maritime AMI Makassar, ID;
  Dwi Wahyuni Rahman⁽³⁾, Polytechnic of Maritime AMI Makassar, ID;
  Andi Rachmianty AM⁽⁴⁾, Polytechnic of Maritime AMI Makassar, ID;
  Muslihati⁽⁵⁾, Polytechnic of Maritime AMI Makassar, ID;
  Wardina Suwedy⁽⁶⁾, Polytechnic of Maritime AMI Makassar, ID;
  

  • pp. 92-101

• Optimizing Container Crane Performance: Enhancing Loading and Unloading Productivity at PT. Kaltim Kariangau Terminal

  Andi Ningrat⁽¹⁾, Politeknik Maritim AMI Makassar, ID;
  Anwar Tahir⁽²⁾, Politeknik Maritim AMI Makassar, ID;
  Rusnaedi⁽³⁾, Politeknik Maritim AMI Makassar, ID;
  Reskyani⁽⁴⁾, Politeknik Maritim AMI Makassar, ID;
  Muslihati⁽⁵⁾, Politeknik Maritim AMI Makassar, ID;
  

  • pp. 102-108

• Vehicle Loading and Unloading Activities at MV Aishakamilah, Hazard Identification, Risk Assessment and Risk Control

  Arif Fuddin Usman⁽¹⁾, AMI Makassar Maritime Polytechnic, ID;
  Sri Asmarita⁽²⁾, AMI Makassar Maritime Polytechnic, ID;
  Andi Murtafiah⁽³⁾, AMI Makassar Maritime Polytechnic, ID;
  Andi Ningrat⁽⁴⁾, AMI Makassar Maritime Polytechnic, ID;
  Sudarman⁽⁵⁾, AMI Makassar Maritime Polytechnic, ID;
  

  • pp. 109-118

• CAD Technology Workshop with the Pierre Bougher Approach in Building Traditional Wooden Ships at Kelompok Usaha Bersama (KUB) Nenang Berlayar North Penajam Paser

  Hariyono Hariyono⁽¹⁾, Department of Naval Architecture, Kalimantan Institute of Technology, ID;
  Rodlian Jamal Ikhwani⁽²⁾, Department of Naval Architecture, Kalimantan Institute of Technology, ID;
  Chris Jeremy Verian Sitorus⁽³⁾, Department of Naval Architecture, Kalimantan Institute of Technology, ID;
  Harlian Kustiwansa⁽⁴⁾, Department of Naval Architecture, Kalimantan Institute of Technology, ID;
  

  • pp. 119-125