A Study of the Effect of Zinc Organic Metal Composite Layers on the Frequency of Quartz Crystal Sensor

Penulis

  • Fifin Tresna Juwita Departement of Physics, Jurusan Sains Teknologi Pangan dan Kemaritiman, Institute Technology of Kalimantan
  • Fadli Robiandi Departement of Physics, Jurusan Sains Teknologi Pangan dan Kemaritiman, Institute Technology of Kalimantan

DOI:

https://doi.org/10.35718/specta.v5i1.309

Kata Kunci:

Frequency, Impedance, QCM, Sensor

Abstrak

The performance, sensitivity, and corrosion protection on the QCM sensor requirement be improved to maximize the value. Therefore, the functional material coating was carried out. The addition of the polystyrene and ZnPc deposited using the vacuum evaporation method. This study intends to the morphology structure and effect of the coating, to improve performance through the annealing process based on the impedance value at QCM. The frequency measurement before and after the coating process was carried out with a variation of the deposition time, which is 1 minute 30 seconds, 1 minute 45 second, 2 minutes, 2 minute 20 seconds, and 4 minutes. The coating and annealing resulted from the surface structure of the QCM sensor are smooth, small porous, and homogeneous. In addition, the impedance to frequency graph indicates a low damping effect means the QCM sensor does not respond viscoelasticity.

Unduhan

Diterbitkan

2021-03-25

Cara Mengutip

Juwita, F. T., & Robiandi, F. (2021). A Study of the Effect of Zinc Organic Metal Composite Layers on the Frequency of Quartz Crystal Sensor. SPECTA Journal of Technology, 5(1), 68–76. https://doi.org/10.35718/specta.v5i1.309

Terbitan

Vol 5 No 1 (2021): SPECTA Journal of Technology

Bagian

Articles

Lisensi

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NoDerivs 4.0 Generic(CC BY-ND 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.